Some People Seem To Find Ramping Procedures A Piece Of Cake. But Others Dont Have Such An Easy Time. For Them, ATV Ramping Is As Difficult As Filling Out Their Tax Returns. Its True That Some People Are Just Naturally Better At This Sort Of Thing, But Its Really Not That Hard To Do In The First Place. ATV Ramping Is So Easy, In Fact, That You Dont Even Need To Practice The Procedure Before Doing It The First Time.Here Is Some Info About The Ramping Process And How To Prepare For It. Follow These Simple Instructions And Youll Have A Trouble-free Time. You Dont Need To Be A Rocket Scientist To Figure Out ATV Rampingyou Just Need To Adhere To A Few Basic Guidelines.Choosing An ATV RampIf Youve Got A Wide Runner Ramp, Your ATVs Wheelbase Width Should Be Used As A Reference For The Width Of The Ramp. In The Same Sense, If Your Preference Is For Single Runner Ramps, The Width Should Measure At Least As Wide As Your Tire.Regular-sized ATV Ramps Are Meant To Be Used With Small Pickups. The Longer Variety Of Ramp Is Designed For Larger Trucks. Make Sure To Check The Ramps Capacity And Your ATVs Load. If You Believe That Your ATV Might Weigh More Than Your Ramps Load Capacity, Then You Might Be Able To Take Advantage Of A Feature On Some ATV Ramps That Lets You Pair Two Ramps, Increasing Load Capacity.Beginning The Ramp ProcedureEnsure That Your Pickup Truck Is Always Parked On A Firm, Flat Surface. Also, Ensure That Everything Is Turned Off And Secured On Your Vehicle Before You Begin With The Ramping. Securing Everything Means Setting The Brake And That Your Trailer (if Applicable) Is Secured As Well.You Must Then Put The Ramp On Firm Ground And At The Lowest Angle Possible On The Trailer Bed. Attach The Ramp To Your Truck. If You Happen To Be Using Runners, Ensure That The Ramps Have The Right Spacing; They Should Be Matched With Your ATVs Wheelbase. The Ramp Will Fit Securely And Snugly If Youve Done This Properly.Now, Put On The Safety Cables In Such A Way That They Support The Ramps Tightly With The Trailer Bed.Double-check Your Ramps Load Capacity And What Your ATV Weighs. Make Sure You Dont Put All Sorts Of Heavy Equipment On Your ATV During This Processthis Might Cause Overload.If Possible, Use A Winch When You Draw The ATV Onto The Trailer Bed Via The Ramp. If You Cant, You Can Drive The ATV Up, But Make Sure To Do It Very Carefully. Take Your Time. You Should Accelerate Smoothly And Slowly. This Is Where Many Accidents Happen Because People Accelerate Too Fast Or Fall On The Side Of The Ramp. If Youre An ATV Novice, You Should Use The Winch.As A General Guideline, Its Always A Good Idea To Have Other People Around When Youre Operating Heavy Equipment.
