Actually, There Are At Least Four Different Kinds Of Colloidal Silver Products Available In The Market, But They Are All Sold Under The Name Of Colloidal Silver.That Said, Suffice To Say That The Effectiveness Of These Products Differ By Degree. Moreover, They Behave Differently In Laboratory Tests And In The Body, From One Person To Another, From One Product To Another, And Even From One Batch To Another Batch Of The Same Product. In Short, Their Effectiveness Is Not Uniform And Their Level Of Safety Or Toxicity May Vary In Accordance With The Standards Followed By The Manufacturer.(NOTE: There Is No Such Thing As Standardized Colloidal Silver So Companies Are Actually Free To Create Their Own Standards And More Often Than Not They Only Follow These Standards Loosely.)Herein Lies The Problem. Because Of This Persistent Lack Of Consistency Of Colloidal Silver Sold Commercially, There Is No Guarantee That What You Bought Today Would Work Quite As Well As What You Bought Before. No Guarantees Either That The Product You Bought Today Is As Safe As The Previous Product By The Same Manufacturer Or Has Side Effects.Therefore, The Simplest And Most Effective Method To Ensure Control Over The Quality Of Colloidal Silver Is To Starting Making Colloidal Silver On Your Own. Just Remember The Three Most Important Factors To Determine Good Quality Colloidal Silver: Purity, Concentration, And Particle Size.All These Factors Can Only Be Determined Through Laboratory Analysis. However, If You Were Making Colloidal Silver On Your Own, You Will Have A Pretty Good Control Over How Much Is Enough In Order To Make Your Solution Fit The Bill.When Making Colloidal Silver, One Of The Most Important Things To Remember Is The Purity Of The Water You Will Be Using As Your Liquid Base. The Pureness Of The Water Controls How Small The Silver Particles Are Going To Be. Remember That The Water Must Be Able To Conduct Electricity Smoothly. If You Are Using Deionized, Mineral, Filtered, Or Purified Water, They May Still Contain Too Many Dissolved Minerals Which Could Not Conduct Electricity Well Enough. The Best Water To Use When Making Colloidal Silver Is Distilled Water.In Addition To Water Purity, Temperature Also Plays A Role In The Particle Size. In This Regard, The General Rule Of Thumb Is This: The Warmer The Water Temperature, The Faster The Reaction Takes Place. The Faster The Reaction, The Smaller The Particles. There Are Also Several Other Variables To Consider When Making Colloidal Silver. It Is Important To Pay Close Attention To Each One.
