It Simply Relates To The Presence And Absence Of Flaws In The Gemstone And Is Considered By Many As One Of The Most Common Indicators Of The Diamonds Quality.Diamond Clarity Is On The Most Basic One Of The Four Cs Of Diamond Grading, With The Others Being Carat, Color, And Cut. It Is Commonly Identified By Either The Inclusions Or The Blemishes, Which Are But Two Of The Common Ways Of Identifying How Flawless The Diamond Is.The Inclusions, On One Hand, Are Flaws That Occur Inside The Gemstone. They Seem To Appear Like Fingerprints And When They Occur, They Tend To Make The Diamond Less Brilliant For The Reason That Internal Flaws Will Interfere With Light As It Passes Through The Stone. There Are Also Some Forms Of Inclusions That Can Make The Gemstone Susceptible To Breaking. The Most Common Forms Of Inclusions Are The Following: Clouds Feathers Crystals Or Minerals Knots Cavities Cleavage Bearding Internal GrainingOn The Other Hand, The Blemishes Are Flaws That Occur Outside The Stone. These Flaws Are More Visible To The Eye Than The Inclusions. Some Of Them Are Caused By A Careless Cut Or Other Possible Accidents, But There Are Others That Are Natural To The Gem. Just Like The Inclusions, The Blemishes On The Diamond Also Affect The Diamond Clarity, As Well As To Its Value. Some Of These Blemishes, However, Count Less On How The Diamond Appears To Be. The Most Common Blemishes Are: Scratches Nicks Pits Trigon Polishing LinesNote That The Fewer The Inclusions And Blemishes In The Gemstone Are, The More Valuable The Gemstone. Its No Wonder Then Why Shoppers Of Diamond Jewelry Tend To Consider The Diamond Clarity Aside From Its Color, Carat And Cut.The Diamond Clarity Is Generally Described By Certain Grading Systems. Of These Systems, The Most Popular Is The Gemological Institute Of America (GIA) Scale, Which Ranks Diamond According To How Flawless And How Imperfect It Is. The Diamond Clarity Based On This System Is Identified With The Following Grades: FL: Completely Flawless IF: Internally Flawless VVS1 VVS2: The Flaws Can Only Be Detected With A 10x Microscope By An Expert. It Is VVS1 When The Expert Only Detects The Flaws When Viewing The Bottom Of The Stone. And, It Is VVS2 When The Expert Detects The Flaws When Viewing It From The Top Of The Diamond. VS1 VS2: The Flaws Can Be Seen With A 10x Microscope, But It Takes A Long Time For Its To The Flaws To Be Identified. SI1 SI2: The Flaws Can Be Seen With A 10x Microscope. I1 I3: The Flaws Can Be Seen By The Naked Eye.So Thats Said. The Diamond Clarity Is Commonly Identified By A Grading System, And Knowing That Diamonds Ranked I1 To I3 Have Flaws That Are Visible To The Eye, It Is Best To Avoid Such Kinds. Also Note That A Diamond That Is Completely Flawless According To The Diamond Clarity Grading System Provided By The GIA Is Very Rare. Only About 20 Of All The Diamonds Mined Have A Diamond Clarity Rating That Is High Enough For The Diamond To Be Considered As A Gemstone.
